VFC operation: When activating STO in a motion process,…
URL: /cs-cz/go/akb/201500604/1VFC operation: When activating STO in a motion process, non-zero setpoint and actual speed values are output (corrected from…
Search
VFC operation: When activating STO in a motion process, non-zero setpoint and actual speed values are output (corrected from…
Position controller cannot be deactivated via C1218/0…
URL: /cs-cz/go/akb/201500447/1Position controller cannot be deactivated via C1218/0 bit7 as expected Corrected from: Inverter Drives 8400 HighLine…
Incorrect calculation of max. traversing distance…
URL: /cs-cz/go/akb/201500450/1Incorrect calculation of max. traversing distance C1213/1 and positioning accuracy C1210/5 Corrected from: Inverter Drives…
SW limit positions are not effective for travel ranges…
URL: /cs-cz/go/akb/201500400/1SW limit positions are not effective for travel ranges < 32768inc Corrected from: Inverter Drives 8400 HighLine…
Incorrect position reconstruction with single-turn…
URL: /cs-cz/go/akb/201500232/1Incorrect position reconstruction with single-turn absolute value encoder after mains switching Corrected from: Inverter Drives 8400…
Field controller parameters calculated by motor…
URL: /cs-cz/go/akb/201500579/1Field controller parameters calculated by motor identification are only effective after mains switching Corrected…
Unstable field weakening control if C578
URL: /cs-cz/go/akb/201500572/1Unstable field weakening control if C578 Corrected from: Inverter Drives 8400 HighLine V16.00.00Inverter Drives 8400…
Actual position: Time offset shows effect during…
URL: /cs-cz/go/akb/201500561/1Actual position: Time offset shows effect during processing in the PLC program (corrected from V1.9.3) Corrected from:-…
Incorrect positioning accuracy display for SSI encoders
URL: /cs-cz/go/akb/201500571/1Incorrect positioning accuracy display for SSI encoders Corrected from: Inverter Drives 8400 TopLine V16.00.00Response of…
Incorrect TP detection when booting up with Hiperface…
URL: /cs-cz/go/akb/201500569/1Incorrect TP detection when booting up with Hiperface encoder Corrected from: Inverter Drives 8400 TopLine V16.00.00Response…
L_MC4P_RobotikHandling: Path movement stops if blending…
URL: /cs-cz/go/akb/201500333/1L_MC4P_RobotikHandling: Path movement stops if blending radius is too large (corrected from V3.12.0) Corrected from: -…
EtherCAT cycle time of 10ms: Sporadic error message,…
URL: /cs-cz/go/akb/201400302/1EtherCAT cycle time of 10ms: Sporadic error message, ErrorID 65281 'Soft PLC error current processing' (corrected from V1.9.3) Corrected…
DC synchronisation: 0x1C32/0x1C33 subindices 6 and 9…
URL: /cs-cz/go/akb/201500410/1DC synchronisation: 0x1C32/0x1C33 subindices 6 and 9 for the time offset permanently display zero (corrected from V2.10.12) Corrected…
"Wrong version format" error message (corrected from…
URL: /cs-cz/go/akb/201500557/1"Wrong version format" error message (corrected from PLC designer V3.5.0) Corrected from:- PLC Designer as of V3.5.0- Device…
V/f characteristic operation with slip compensation:…
URL: /cs-cz/go/akb/201500356/1V/f characteristic operation with slip compensation: Unexpectedly long overrun after stopping (corrected from V1.9.3) Corrected…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial