Lenze in Poland

Lenze Polska Sp. z o.o. is the official Lenze sales representative in Poland.

Our headquarter is located in Katowice, where we provide sales and technical advice, trainings and service. We also provide support through our regional office in Torun and sales representatives in Warsaw, Poznan, Gdansk, Wroclaw, Torun, Katowice, Krakow and Rzeszow.

Company portrait

Lenze Poland Sp. z o.o., former Rotiw Sp. z o.o., was founded in 1995 in Katowice as an official Lenze Group sales representative on the territory of Poland.

For more than 25 years Lenze Polska has been supporting Polish machine manufacturers and end users with individual solutions based on Lenze products. International character of Lenze also provides access to the latest technology and application solutions.

We support our partners on every stage of preparation, implementation and operation of the application:

  • We provide assistance and advice on selecting optimal Lenze solutions
  • We provide technical support during the design, programming and commissioning of the application • We train designers, programmers, constructors and maintenance engineers
  • We guarantee service on a 24/7 basis

The dynamic growth of the company allows us to constantly expand our sales structures in Poland, which are divided into regions: Warsaw, Poznań, Gdańsk, Wrocław, Toruń, Katowice, Kraków and Rzeszów. Our sales engineers advise customers throughout Poland on selecting optimal drive and automation systems.

We also offer theoretical and practical trainings in our in Katowice and Toruń.

Management

Lenze is represented in Poland by Lenze Poland Sp. o o.o. based in Katowice.

Tobiasz Witor
Chairman of the board

Our history

Timeline

2020
25th anniversary of Lenze Polska Sp. z o.o.

2016
Change in the management board of the company. Tobiasz Witor becomes the new Chairman of the Board.

2015
20th anniversary of Lenze Polska Sp. z o.o.

2011
New headquarters (at the old address). Currently in Katowice we have 1,000 sqm of office space, electronic and mechanical services, meeting conference and training magazine.

2009
On 26.03.2009 the Extraordinary Meeting of Shareholders of the company Lenze-Rotiw Sp. of o.o. resolution on a merger with the company Lenze Automation Systems Sp. of o.o. with effect from 01.05.2009. After the merger, the Company will operate under the name Lenze Poland Sp. of o.o.

2008
Lenze-Rotiw Sp. of o.o. enter the Belarusian market. Trading partner Logoprom company is based in Minsk.

2007
Formed regional sales offices in Grodzisk, Mielec, Legnica.

2002
Lenze-Rotiw Sp. of o.o. acquires 100% stake in Lenze Automation Systems Sp. of o.o. For Lenze working in Poland for over 100 people!

2001
Lenze-Rotiw Sp. of o.o. assumed office in Kaunas. UAB created Lenze that his action also includes the territory of Latvia.

1999
Lenze AV acquires 51% stake in Rotiw Sp. of o.o. Lenze-formed Rotiw Sp. of o.o.

1996
The company Lenze Lenze AG called Tarnów Sp. of o.o. based in Tarnow. Main activities include processing of cast iron, aluminum and mounting gearmotors. Lenze Lenze assumes AV Automation Systems Sp. of o.o. in Torun. The activities focused on the assembly of control cabinets and propulsion applications.

1995 - 1999
Formed Rotiw Sp. of o.o. based in Katowice. The company is an official Lenze sales representative  on Polish territory.

1990 - 1995
The beginnings of the Lenze. Lenze partner in Poland is a Polish-Austrian joint venture Trend Ltd.

Membership

We are cooperating with 15 Universities of Technology in Poland. Our engineers periodicly gives lectures for the students. We are organizing Road Shows for students and university employees to promote Lenze among engineers.

Nasze kontakty w skrócie

Filter

Our Lenze Performance Partners

Learn more about the Lenze Performance Partner concept.

Lenze Performance Partner Distribution

STERCONTROL

STERCONTROL
ul. Ostrowskiego 9
53-238 Wrocław
+48 (71) 719 90 09
sklep@stercontrol.pl

www.stercontrol.pl

 

Brammer S.A.

Brammer S.A.
ul. Handlowa 2a
36-100 KOLBUSZOWA
+48 (17) 227 00 00
+48 (17) 227 00 01
brammer@brammer.pl
www.brammer.pl

T-Matic Grupa Computer Plus Sp. z o.o.

T-Matic Grupa Computer Plus Sp. z o.o.
ul. J.Waszyngtona 23
15-304 Białystok
+48 (085) 74 89 100
+48 (085) 74 89 101
bialystok@computerplus.com.pl
www.computerplus.com.pl

FHU WIKPER Wiktor Peret

FHU WIKPER Wiktor Peret
39-410 Grębów 60
+48 (015) 811 27 53
+48 (015) 811 23 24
wikper@wikper.pl
www.wikper.pl/

CENTRUM AUTOMATYKI PRZEMYSŁOWEJ

CENTRUM AUTOMATYKI PRZEMYSŁOWEJ
HURTOWNIA ELEKTRYCZNA PROGRES
ul. Północna 32
44-335 Jastrzębie Zdrój
+48 (032) 475 15 15
+48 (032) 475 17 83
sprzedaz@progres-automatyka.pl
www.progres-automatyka.pl

EL-HELU Robert Zięba

EL-HELU Robert Zięba
ul. Staromiejska 12/14C
26-600 Radom
+48 (048) 363 32 40
+48 (048) 331 25 36
biuro@el-helu.com
www.lenze.el-helu.com/

Lenze Performance Partner System Integration

MECAD Sp. z o.o.

Firma zajmuje się.

  • Projektowaniem i budową maszyn, urządzeń oraz kompletnych linii produkcyjnych.
  • Projektowaniem i wdrażaniem systemów kontroli, układów sterowania oraz systemów akwizycji danych.
  • Przenoszeniem maszyn i relokacją linii produkcyjnych.
  • Prowadzeniem i realizacją projektów pod klucz.
  • Wizualizacją i animacją maszyn oraz przyszłych rozwiązań.

MECAD Sp. z o.o.
ul. Krzywa 35
64-920 Piła

mecad.pl
mecad@mecad.pl

PAR-SYSTEMS

PAR-SYSTEM Company has been operating since 2007 and from the very beginning it has been dealing with automation and robotics. At present, it performs complex implementations all over Europe in the range of internal transport, robotic palletizing and loading stations, modernization of technological lines, production management systems and RFID systems.

PAR-SYSTEMS
inż. MARIUSZ KOŁAKOWSKI
ul. Kolejowa 4
13-300 Nowe Miasto Lubawskie  
+48 696 492 522

http://par-systems.pl/

RM AUTOMATYKA
RM AUTOMATYKA

Firma RM AUTOMATYKA dostarcza gotowe rozwiązania w oparciu o sprawdzone komponenty jak i nowinki techniczne. Kompleksowo realizuje projekty związane z branżą automatyki oraz mechatroniki od projektu przez wykonanie, montaż i uruchomienie  Zajmuje się również naprawą oraz konserwacją maszyn przemysłowych.

RM AUTOMATYKA
ul. Kościuszki 20/2
44-100 Gliwice
+48 795 592 328

http://rmautomatyka.pl/

ALBUS Automatyka

Od 1989 roku firma Albus dostarcza najwyższej jakości usługi w zakresie elektroniki i automatyki przemysłowej, tj.: projektowanie układów sterowania, budowa szaf sterownicznych, uruchamianie maszyn i linii produkcyjnych, serwis maszyn, demontaż i przenoszenie maszyn przemysłowych, doradztwo techniczne oraz handel maszynami. Bogate doświadczenie pozwoliło firmie Albus wypracować i wdrożyć wiele innowacyjnych rozwiązań dla różnych sektorów przemysłu – od spożywczego po stalowy.

ALBUS
ul. Tworzeń 60 a
41-303 Dąbrowa Górnicza   
+48 604 441 464
info@albus-automation.com

http://albus-automation.com/

CIM-EL
CIM-EL

CIM-EL specjalizuje się w dostarczaniu nowoczesnych i niezawodnych rozwiązań w dziedzinie szeroko pojętej automatyki przemysłowej. Oferuje takie usługi jak: modernizacja maszyn, prefabrykacja szaf sterowniczych i rozdzielnic elektrycznych, montaż szaf sterowniczych, programowanie sterowników PLC, wizualizacja procesów, automatyzacja silosów, automatyzacja linii produkcyjnych, modernizacja i wymiana sterowania maszyn, w tym również maszyn CNC.

CIM-EL
77-143 Skwierawy 17
+48 513-180-080
biuro@cim-el.eu

https://cim-el.eu/ 

ESMATIC Sp. z o. o
ESMATIC Sp. z o. o.

We are a dynamically developing company supplying Polish and foreign plants with industrial machines and robotic stations allowing to increase productivity. We are prototyping machines. If you have an unusual idea for automation, write to us!
Email: kontakt@esmatic.pl

ESMATIC Sp. z o. o. KAMIL BIEDULSKI, PRZEMYSŁAW PUPA
UL. PARKOWA 24A LEGIONOWO,
05-120, POLSKA NIP: 5361955958
Website: Esmatic – projektowanie i budowa maszyn

Logo Esmatic
Logo Esmatic

 

Item Service Sp. z o. o.
Item Service Sp. z o. o.

Item Service was founded in 2008. From the very beginning, the company has been providing commercial services in the sale of automation, pneumatics, electromechanics and vacuum technology elements. To meet the expectations of our clients, for several years we have also been designing and delivering advanced technologies in robotization and automation of entire production lines. In addition to the construction of machines, we also carry out modernization works on existing production lines, as well as provide components in the field of maintenance. The company specializes in machine building with the use of industrial robots.
Email: biuro@itemservice.eu
Telefon: 14 639 08 76 D

Item Service Sp. z o. o.
Siedziba firmy
ul. Warsztatowa 5
33-100 Tarnów
NIP: 8733257940
Strona: Item Service |Budowa Maszyn Pakujących |Automatyka i Pneumatyka

Logo Item Service
Logo Item Service
KORDECKI AUTOMATION SP. Z O. O.
KORDECKI AUTOMATION SP. Z O. O.

Designing and commissioning of industrial automation is carried out in our company comprehensively from design, through prefabrication of control cabinets, programming, on-site connection, commissioning and ending with tests with users. We have worked directly for companies or you can find our projects in such companies as: Toyota Manufacturing, Sanden Manufactruring, Whirlpool, Faurecia, European Spallation Source, Kriosystem, Electrolux, DIKO Polska, Saule Technologies, Legrand, Carl Stahl, Parker Hannifin Manufacturing Poland, SRG Global and for many other companies that are leaders in their areas and industries. .
Email: kordecki@kordecki.com.pl
Telefon: 502 501 136

KORDECKI AUTOMATION SP. Z O. O.
ul. Fabryczna 16
53-609 Wrocław
NIP: 8952019577
Strona: Automatyka przemysłowa prefabrykacja szaf sterowniczych – Kordecki

Logo Kordecki
Logo Kordecki
Kontaktní formulář