- Version history - 8400 StateLine Software (SW) ≤ V04.xx

8400 StateLine Software (SW) V04.xx:

Function extensions:

Analog input 1 - Minimum speed (L-C00010) (from V4.0 onwards)
Boost input at function block LS_MotorInterface (from V4.0 onwards)
Function blocks - Configurable behaviour of the blocks LS_AnalogOutput, LS_DigitalOutput, LP_CanIn and LP_CanOut in the event of a fault/error (from V4.0 onwards)
Integration of a safety control word for setpoint generation Safe Stop (SS1) (from V4.0 onwards)
Configurable group error signal at the LS_DriveInterface system block (from V4.0 onwards)
Motor brake for braking without brake resistor (from V4.0 onwards)
New application ¨Shutdown positioning¨ (C00005 = 3000) (from V4.0 onwards)
New function blocks (from V4.0 onwards)
Reversal of motor phase sequence for correction of cable errors (from V4.0 onwards)
V/f characteristic control with 11 interpolation points that can be set (from V4.0 onwards)

Eliminated function restrictions:

Function extensions:

8400 StateLine Software (SW) V03.xx:

Function extensions:

Eliminated function restrictions:

8400 StateLine Software (SW) V02.xx:

Function extensions:

8400 StateLine Software (SW) V01.xx:

Function extensions:

Eliminated function restrictions:

Version history (Intranet supplement), Articles which have only been published Lenze internal