New TM: L_TS2P_SyncPos

Function extension:
The technology module L_TS2P_SyncPos is now contained in the L_TS2P_TechModulesSynchronizingCamming.

Contained in which products?
L_TS2P_TechModulesSynchronizingCamming (from V03.26.0.169)
 
Application:
The technology module L_TS2P_SyncPos is the basic version of L_TS2P_SyncAndCorrection without register control and TP correction. It contains a position synchronisation between master and slave:
In a modulo measurement system, this means that a clock pulse from the master causes a clock pulse from the slave.
The slave axis can be disengaged at a certain position and re-engaged without jumps.
An offset between the master and slave axes can be set by trimming - analogous to manual travel - or as an absolute offset value. The offset is switched to the main setpoint via profile generation.


Automatic Translation

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/202300027/1/
Meta data
Taxonomy: Lib L_CM1P_ControlModules , Lib L_TB1P_TechnologyBasics , Lib L_TB2P_TechModulesBasic , Lib L_TF2P_TechModulesFollowingPositioning , Lib L_TP2P_TechModulesProcessFunctions , Lib L_TS2P_TechModulesSynchronizingCamming , Lib L_TW2P_TechModulesWindingTraversing , FAST Motion Modules V2
AKB-ID: 202300027
Last update: 2023/09/10
Category: Version Informations

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
Contact form