L_MC1P_BrakeGrindIn: Parameterisable movement range for grinding in the brake (from V03.26.00)
Function extension:
AxisRef function 'Loop in brake':
The range of motion for the brake can now be limited if required.
The following parameters are available for this:
Parameter
Name
Unit
Factory setting
Value range
Subindex :168
Grind-in brake: Lower position limit
Unit
0
-2147483648 ... 2147483647
Subindex :169
Grind-in brake: Upper position limit
Unit
0
-2147483648 ... 2147483647
Subindex :142.Bit3
Steuerwort Bit3 (Enable additional position limits)
---
0
0...1
The function for limiting the range of movement is only effective if it is activated via the above-mentioned control bit under subindex :142.
The position limits must be set in relation to the output side.
Contained in which products?
Library: L_MC1P_MotionControlBasic (FAST Motion) from V03.26.00
(Update via Package Manager)
Application:
Motor holding brake: "Grinding in" the factory-new friction disc (brake lining) so that the full holding force is immediately available in operational use.
