All TMs from L_TS2P: Position jump when xAbort and xSync are set simultaneously (corrected from V3.25.0)

Corrected from:
Library: L_TS2P_TechModulesSynchronizingCamming (from V3.25.0)
             (Update via Easy Package Manager)

Response of the new version:
If the functions xSyncPos = TRUE and xAbort = TRUE are set at the same time, the axis is kept at standstill. No coupling process is carried out.

What happens?
The position of the axis jumps to lrSetPosition = 0

When does the behaviour occur?
Two functions are assigned simultaneously in the same PLC cycle:
  • xSyncPos = TRUE
  • xAbort = TRUE 
Which products are affected?
L_TS2P_ElectronicGearboxBase from library L_TS2P_TechModulesSynchronizingCamming
L_TS2P_FlexCamState from library L_TS2P_TechModulesSynchronizingCamming
L_TS2P_FlyingSawState from library L_TS2P_TechModulesSynchronizingCamming
L_TS2P_SyncAndCorrectionState from library L_TS2P_TechModulesSynchronizingCamming
L_TS2P_CrossCutterState from library L_TS2P_TechModulesSynchronizingCamming

Short-term measures:
The function xSyncPos must not be assigned together with the function xAbort.

Evaluation / recommendations:
By considering the short-term measure, the described behaviour can be avoided in a simple way.

Automatic Translation


URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/202200007/1/
Meta data
Taxonomy: Lib L_CM1P_ControlModules , Lib L_TB1P_TechnologyBasics , Lib L_TB2P_TechModulesBasic , Lib L_TF2P_TechModulesFollowingPositioning , Lib L_TP2P_TechModulesProcessFunctions , Lib L_TS2P_TechModulesSynchronizingCamming , Lib L_TW2P_TechModulesWindingTraversing , FAST Motion Modules V2
AKB-ID: 202200007
Last update: 2023/09/09
Category: Version Informations

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
Contact form