Which products are affected?
Inverter Drives 8400 HighLine and TopLine from firmware version 12.00.00.00
Functional description
When the 'StandBy' state is changed to a setpoint-controlling operating mode of the MCK (e.g. speed follower, positioner, …), the current speed is transferred as setpoint. This is required for the connection to a rotating drive. In C2611/5, a threshold can be defined up to which not the current speed is transferred, but a setpoint value of '0' is set.
Applications
Avoiding the transfer of very low speeds during the change to the 'Positioning' operating mode, which might cause a drift as long as a start of positioning is not requested.
