- Difference description concerning the 9300vector (110 ... 400 kW) from SW7.0 to SW7.1

Eliminated function restrictions:
- Torque limitation < 5="" %="" causes="" sudden="" changes="" in="" torque="" in="" the="" case="" of="" 'vector="" control="" with="" feedback'="">
- Wrong entry under code C0095 after parameter set transfer (elimination)
- Error handling in case of CE4 warnings (elimination)
- Function restriction in the DFRFG function block in case of a negative input signal (elimination)
- No communication between keypad and basic device if code C0143 is changed (elimination)
- Parameter set transfer, C0082, C0085 and C0092 are not transferred if the keypad is used (elimination)
- PI trip after parameter set transfer (elimination)
- Root calculation, faulty output of the SQRT1 function block (elimination)

Function extensions:
- Influencing the waiting time during an OU message by means of code C0912
- Incrementing of the CAN telegram counter under code C0360/005
- Behaviour after an overvoltage in the DC bus dependent on code C0913
- Additional mode for the FCNT1 function block

Combination with other products:
- Setting parameters of the 9300vector 110 … 400kW (SW7.1) by means of the Global Drive Control

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/200604974/1/
Metadaten
Taxonomy: 9300 vector EVF93xx-EH hoist frequency inverters , 9300 vector EVF93xx-EV frequency inverters , 9300 vector frequency inverters
AKB-ID: 200604974
Last update: 2023/09/08
Category: Versions-Informationen

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
Kontaktformular