All TM Winder: Error message PosDiffGTHalfCycleLength (corrected from V3.21.0)

Corrected from:

- L_TW2P_TechModulesWindingTraversing V3.21.0.15
- L_TT1P_TechnologyModules_LM V3.21.0.6
(Update via EASY Package Manager)

Response of the new version:

The diameter lrSetDiam is limited downwards by parameter scPar.lrMinDiam. If the parameter scPar.lrMaxDiam < scPar.lrMinDiam is defined, a warning 19034 'DMinBiggerDMax_CalcDiameter' is activated at the TM output.

What happens?

The calculated diameter from the technology module is set to lrSetDiamOut = 0.

When does the behaviour occur?

The parameter is set scPar.lrMaxDiam = 0.

Which products are affected?

Function block L_TT1P_WinderTension/DancerCtrl in library L_TT1P_TechnologyModules_LM
Function block L_TW2P_WinderTension/DancerCtrlState in library L_TW2P_TechModulesWindingTraversing

Short-term measures:
The parameter must be set scPar.lrMaxDiam > 0.

Evaluation/recommendations:
The calculated diameter must never be set smaller than scPar.lrMinDiam. In the described behaviour the diameter is influenced by the parameter scPar.lrMaxDiam. The calculation of the diameter is not restricted in the function if scPar.lrMaxDiam is set to valid values.

Automatic Translation

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/202000085/1/

Meta data

Taxonomy: Lib L_CM1P_ControlModules , Lib L_TB1P_TechnologyBasics , Lib L_TB2P_TechModulesBasic , Lib L_TF2P_TechModulesFollowingPositioning , Lib L_TP2P_TechModulesProcessFunctions , Lib L_TS2P_TechModulesSynchronizingCamming , Lib L_TW2P_TechModulesWindingTraversing , FAST Motion Modules V2 , TM Basic Motion , TM Cross Cutter , TM Electrical Shaft Position , TM Electrical Shaft Velocity , TM Flex Cam , TM Flying Saw , TM Magic Track , TM Pick and Place , TM Register Control , TM Smart Track , TM StackerCrane , TM Table Positioning , TM Temperature Control , TM Track Pick and Place , TM Traverser , TM Virtual Master , TM Winder Dancer-controlled , TM Winder Tension-controlled , FAST Motion Lib L_TT1P_LM
AKB-ID: 202000085
Last update: 2023/09/09
Category: Version Informations

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.