In the CANopen mode the I/O system does not reset automatically function Save and Load to index I1010h and I1011h (elimination)

Which products are affected?
EPM-T110 1A 12 (CAN Gateway module firmware 1.2)
EPM-T83x 1A 12 (compact module firmware 1.2)

Eliminated function restriction
In the CANopen mode the user can write the indices I1010h and I1011h with the values 'Save' or 'Load' in the ASCII format by means of a CANopen parameter setting tool. After successful execution, the I/O system resets the values of these two indices automatically. When the parameter setting software GDC is used, the indices I1010h and I1011h are not available (they are not contained in the PDBs), as GDC does not support the processing of ASCII values.

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/200508997/1/
Meta data
Taxonomy: EPM-T1xx CAN PROFIBUS Bus Coupler , EPM-T2xx Digital IO , EPM-T3xx Analog IO , EPM-T4xx Function modules , EPM-T8xx Digital IO compact , EPM-T9xx Terminal modules , IO System IP20
AKB-ID: 200508997
Last update: 2023/09/08
Category: Version Informations

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
Contact form