Which products are affected?
Keypad XT (version 3A21) in combination with a starttec
What happens?
All four parameter sets cannot be accessed.
When does the problem occur?
Under menu item 2 there is only subcode 2 available. This code only allows accessing the codes of parameter set 1.
Possible diagnostics?
If a keypad with software version 2.1 is used, it is only possible to select subcode 2 under menu item 2.
Short-term measures/recommendations?
Use of a keypad with firmware version 2.2 or higher
Evaluation:
Due to the restricted parameter setting range it is not possible to use the complete starttec functionality by means of the keypad.
