Which products are affected?
Starttec, all designs, SW version 1.3 and keypad XT E82ZBBXC (SW ≤ 2.1)
What happens?
The starttec cannot be parameterised with the keypad XT, as the values in the corresponding codes cannot be set correctly.
When does the problem occur?
The problem occurs when your try to modify the codes of the parameter sets with a keypad XT (SW ≤ 2.1).
Possible diagnostics?
A sensible parameter setting via the keypad XT is not possible.
Short-term measures/recommendations?
Use the keypad E82ZBB
Evaluation:
A sensible parameterisation of the 4 starttec parameter sets is not possible with the keypad XT (SW ≤ 2.1).
