Fixed as of:
Cabinet Controller c430 V1.15.2
Cabinet Controller c520 V1.15.2
Cabinet Controller c550 V1.15.2
Behavior of the new version:
After being removed and reinserted, the USB flash drive is once again accessible under "/media/usbstorage_1," even if the USB flash drive was not deactivated via parameter 0x5902/1 before removal.
Description of the behavior:
The USB flash drive is not accessible via the path "/media/usbstorage_1". The following error message is displayed:
FILE_OPERATION_DENIED
Conditions under which this behavior occurs:
When a USB flash drive is connected to the controller for the first time, it isaccessiblevia the path"/media/usbstorage_1".
However, if the USB flash drive is removed from the device and reinserted without first disabling it using parameter 0x5902/1, the USB flash drive is no longer accessible via the original path but is incorrectly accessible via the path "/media/usbstorage_2".
Affected products:
Cabinet Controller c430, version 1.15 and later
Cabinet Controller c520, version 1.15 and later
Cabinet Controller c550, version 1.15 and later
Short-term measures, recommendations, assessment:
Deactivate the USB flash drive using parameter 0x5902/1 before removing it from the device.
