i950 Holding brake Parameter 0x2820:023=[0], [1], [2]: Selection texts do not match the function (fixed from V01.09.01)
Lifted from:
Servo inverter i950 FW: from V01.09.01
Related device description file
Behavior of the new version:
brake control parameter 0x2820:23: In the device description of the new version, the selection texts for the configuration of the brake output are now correctly assigned to the selection numbers again.
description of the behavior: brake control: In parameter 0x2820:23 for configuration of the brake output, the selection texts of the two selection numbers [0] and [2] are mixed up and partly incorrect. The swap refers only to the displayed selection texts. The "actual function" assigned to the individual selection numbers remains unaffected:
0x2820:23= [0]:
Actual function: Internal brake control
selection text: "External digital output"
0x2820:23= [1]:
Actual function: External components at the brake output
selection text: "External components at the brake output"
0x2820:23= [2]:
Actual function: External components at the digital output
selection text: "Internal brake voltage"
Under what conditions does the behavior occur?
Parameterization via the engineering tools (device description file) and
use of the i750 firmware version listed under "affected products".
Affected products:
Servo Inverter i950 FW: V01.08.00 affected
Short-term measures / Evaluation / recommendations: The setting of the parameter 0x2820:23 to configure the brake output according to the "actual function" described above, regardless of the swapped selection texts.
