GSD files for small servo drives (series 930) with Profibus connection

Description:
By means of the profibus-DP GSD-files, which can be downloaded here, the small servo drive can be integrated in the profibus DP configuration software.
For which field bus system is the drive suitably, can be taken from the following type key.

Type code
93    1    M    P    K    1    2 (servo inverter 931M/W)
93    1    E    P    K    1    0 (servo inverter 931E)

Designation:
- Size: 1 up to 600 W
        2 larger than 600 W
  - Design: E = built-in device for IP control cabinet
                 M =  Servo inverter integrated  
                     W = IP 54 built-in device IP 54 for mounting close to the machine
        - Communication: C = CAN-Bus
                                         P = Profibus
              - Voltage variant:   K = extra-low voltage
                                             N = low voltage
                    - Options:   1 = Inputs and outputs
                                       2 = Local CAN interface for I/O modules
                          - Mounting:    0 = decentralised mounting
                                                1 = axial mounting
                                                2 =  radial mounting

System requirements:
Independent from the used PLC- and profibus-master hardware the GSD-files write the Lenze communication modules in conformity. According to the tested PLC and profibus master hardware and software these files are to be integrated in the corresponding configuration software.

Software installation:
Unpack the ZIP-file in any directory on your computer and insert the GSD-files according to the profibus DP configuration software. If you used STEP 7 Siemens software, the files will be installed via the software 'Hardware config', menu Extra and 'Install new GSE'.

Download:
GSD_02_2005_931MW.zip (1.16 kB): GSD file for Lenze small servo drives 931M/W with profibus-DP
GSD_05_2007_931EP.zip (11.5 kB): GSD file for Lenze small servo drives 931E with profibus-DP  

Profibus user organisation:
http://www.profibus.com