Corrected from:i700 servo inverter, V2: from V02.12.02.12444
i700 servo inverter, V1: (for V1 no correction planned)
Response of the new version:
When uploading a parameter set using the Easy Starter, the described error messages no longer appear.
What happens?
Easy Starter engineering tool:
When uploading a parameter set, e.g. by clicking the corresponding button from the button list, the Easy Starter reports several errors relating to the object 0x10F3 in the following dialog.
For example: "Unknown device parameter found: 0x10F3:006"
When does this behaviour occur?
The described behaviour always occurs when uploading the parameter set from the i700 and using i700 firmware version V01.11.xx or V02.11.xx.
Which products are affected?
i700 servo inverter, V1
Short-term measures, Evaluation/recommendations:
The indicated error messages can be ignored.
They are not relevant for the functions of the device or the successful upload of the parameter set.
The messages are uncritical and can be ignored. All functions of the Easy Starter and the i700 are completely operational.
