3231C (Bay Trail) with monitor panel connected: Initial automatic touch calibration does not work

What happens?

When actuating the touch, the calibration point does not move. Therefore, the touch cannot be calibrated.

When does this behaviour occur?

The behaviour only occurs if the touch of the monitor panel (MP800 - MP9000; CS1000 - CS9000) was not plugged onto the USB socket at the DVI connector (X7; USB3).

The behaviour only occurs after a new installation of the firmware (restore) or after deleting the SD card of the 3231C controller.

In this case, the touch calibration appears automatically, the first time, the controller is started.

Which products are affected?

3231C controller with Intel Bay Trail processor and (MPxxxx) monitor panel connected to DVI and USB interface.

At the 3231C, the affected processor version can be identified by the coding 'M5H' in the type code on the nameplate (E32GAC10000M5H*XXX-02S133**000).

Short-term measures:

You only have to take one of the following two remedies to correct the behaviour. If possible, you should take the first remedy.

1. Use USB socket X7 (USB3) to connect the touch.

2. After booting has been completed, you can use a connected keyboard or the mouse to open the control panel and start touch calibration again. In this way, the touch can be calibrated.

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/201800080/1/

Metadaten

Taxonomy: Controller 3221 C , Controller 3231 C , Controller 3241 C , Controller 3251 C , Controller 3200 C , Monitor MP 1000 DVI , Monitor MP 1000s DVI , Monitor MP 1050 DVI , Monitor MP 1050s DVI , Monitor MP 2000 DVI , Monitor MP 2050 DVI , Monitor MP 5000 DVI , Monitor MP 5020 DVI , Monitor MP 5050 DVI , Monitor MP 5070 DVI , Monitor MP 800 DVI , Monitor MP 9000 DVI , Monitor Panel EL , Monitor CS 5000 DVI , Monitor CS 5010 DVI , Monitor CS 5050 DVI , Monitor CS 5070 DVI , Monitor CS 9000 DVI , Monitor Panel CS
AKB-ID: 201800080
Last update: 2023/09/09
Category: Versions-Informationen

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.