Corrected from:
Inverter Drives 8400 StateLine V16.00.00
Inverter Drives 8400 HighLine V16.00.00
Inverter Drives 8400 TopLine V16.00.00
Inverter Drives 8400 protec StateLine V08.01.00 0,37 kW - 5,5 kW
Inverter Drives 8400 protec HighLine V08.01.00 0,37 kW - 5,5 kW
Inverter Drives 8400 protec HighLine V16.01.00 7,5 kW
Response of the new version: Removal of the PS03 information when loading compatible parameter sets from the memory module. Compatibility information can be found in the software manual.
What happens?
When using the memory module of older device firmware versions (e.g. V12.00.00) in new device firmware versions (e.g. V15.00.00), a PS03 information is displayed and saved in the logbook. The information can be deleted by saving the parameter set. Since not every customer can save the parameter set, the information cannot be used for compatible parameter sets.
Which products are affected?
Inverter Drives 8400 StateLine FW smaller V16.00.00
Inverter Drives 8400 HighLine FW smaller V16.00.00
Inverter Drives 8400 TopLine FW smaller V16.00.00
Inverter Drives 8400 protec StateLine smaller V08.01.00 0,37 kW - 5,5 kW
Inverter Drives 8400 protec HighLine smaller V08.01.00 0,37 kW - 5,5 kW
Inverter Drives 8400 protec HighLine schmaller V16.01.00 7,5 kW
Short-term measures:
-
Evaluation/recommendations:
You can no longer see that the parameter set was created by a different version. Starting the device takes longer since the default settings will be loaded before the actual loading process is started.
