Which products are affected? EMF 2113 Interbus communication module FV < 1.2
What happens?
The LED display of the two basic device LEDs at the module does not correctly indicate the current status of the two LEDs at the basic device.
When does the problem occur?
This information is provided in the pdf document attachted.
Possible diagnostics?
The faulty behaviour has occurred if the status of the two basic device LEDs at the module does not match with the current basic device status.
Short-term measures/recommendations?
None.
Evaluation:
A controlled drive status can always be ensured since the current basic device status is transmitted correctly to the module via the AIF status word. As a result, the higher-level PLC receives the current drive controller status correctly.
