L_TS2P_FlyingSaw: xSyncInstant does not work with marker cut (corrected form V3.24.0)

​Corrected from:
Library L_TS2P_TechModulesSynchronizingCamming V3.24.0
(Update via EASY Package Manager)

Response of the new version:
The saw carriage is synchronised to the material position with xSyncIntant = TRUE.

What happens?
The saw carriage is not synchronised to the material position with xSyncIntant = TRUE.

When does the behaviour occur?
When the TM is used in mark-controlled mode: eFlyingSawMode= 0

Which products are affected?
Function module L_TS2P_FlyingSawState from library L_TS2P_TechModulesSynchronizingCamming

Short-term measures:
The TM synchronises to one mark.

Evaluation / recommendations:
The function of the mark-controlled operation is enter. The saw carriage can be synchronised to the position of the marks. With the virtual marker, the synchronisation of the saw carriage can be started from the application.

Automatic Translation

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/202100323/1/
Metadaten
Taxonomy: Lib L_CM1P_ControlModules , Lib L_TB1P_TechnologyBasics , Lib L_TB2P_TechModulesBasic , Lib L_TF2P_TechModulesFollowingPositioning , Lib L_TP2P_TechModulesProcessFunctions , Lib L_TS2P_TechModulesSynchronizingCamming , Lib L_TW2P_TechModulesWindingTraversing , FAST Motion Modules V2
AKB-ID: 202100323
Last update: 2023/09/09
Category: Versions-Informationen

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
Kontaktformular