L_TT1P_ElectricalShaftPosBase: Measuring point MP03_lrSetGearBoxPosOut indicates the value 0

Eliminated from:

L_TT1P_TechnologyModules_SM3 V3.9.0.9

L_TT1P_TechnologyModules_LM V3.9.0.62

Behaviour of new version:

The measuring point MP03_lrSetGearBoxPosOut shows valid values.

What happens?

The MP03_lrSetGearBoxPosOut element of the scSignalFlow technology module output constantly indicates the value 0.

When does this behaviour occur?

When the L_TT1P_ElectricalShaftPosBase technology modules is activated (xEnable=TRUE), the measuring point MP03_lrSetGearBoxPosOut indicates the value 0.

Which products are affected?

PLC Designer from V3.8

L_TT1P_TechnologyModules V3.8.0.23

Short-term measures/recommendations:

If you want to access the information of the measuring point MP03_lrSetGearBoxPosOut in your application, use the L_TT1P_ElectricalShaftPosState or the L_TT1P_ElectricalShaftPosHigh technology module.

Evaluation:

The measuring point MP03_lrSetGearBoxPosOut indicates the value 0. The function restriction does not impair the actual function of the technology module. The function restriction only concerns the L_TT1P_ElectricalShaftPosBase technology module.

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/201400219/1/

Metadaten

Taxonomy: TM Basic Motion , TM Cross Cutter , TM Electrical Shaft Position , TM Electrical Shaft Velocity , TM Flex Cam , TM Flying Saw , TM Magic Track , TM Pick and Place , TM Register Control , TM Smart Track , TM StackerCrane , TM Table Positioning , TM Temperature Control , TM Track Pick and Place , TM Traverser , TM Virtual Master , TM Winder Dancer-controlled , TM Winder Tension-controlled , FAST Motion Lib L_TT1P_LM , L-force Motion Technology Modules L_TT1P_SM3
AKB-ID: 201400219
Last update: 2023/09/09
Category: Versions-Informationen

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.