L_Curve_1 FB - incorrect output values (eliminated from V5.0 onwards)

Eliminated from:
HighLine with firmware version V05.01 or higher

Behaviour of the new version?
The L_Curve_1 function block can be used with the Out = 0, Out = In, and
Out = f(table) functions.

---

Which products are affected?
8400 HighLine with FW < 05.01

What happens?
The output does not provide plausible values.

When does the problem occur?
If the L_Curve_1 FB is used.

Possible diagnostics?
Online monitoring in the FB Editor.

Short-term measures / recommendations?
None

Evaluation:
The incorrect functioning of the FB is detected immediately during commissioning.

Information taken from chapter 1.1.48 of Service Message No. 16/2010.