Implementation of an application data memory

Which products are affected?

EVS93xx-EI (Servo PLC Version 6.3 DSMC control board)
EVS93xx-ET (Servo PLC Version 6.3 DSMC control board)
EPL-10200-EI (Drive PLC Version 6.3)

Function description

The data of the application memory is copied into the RAM memory in order to be able to access them quickly. This memory location can be accessed via the function library LenzeMemDrv.lib or via the following codes:
  • C0504  Activate/deactivate write protection for RAM memory
  • C0505  Offset address within the RAM block selected under C0506
  • C0506  Selection of the RAM blocks for access under C0508 / C0509
  • C0507  Value read from the RAM block
  • C0508  Value to be written into the RAM block
  • C0509  Check sum test

Applications

In case of the Servo PLC the CAM motion profiles are saved in the application memory (FLASH) of the ROM.

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/20034022/1/
Meta data
Taxonomy: Controller Drive PLC EPL-10200 , Controller Drive PLC EPL-10201 , Controller Drive PLC , 9300 Servo PLC Logic (EI) servo inverters , 9300 Servo PLC Technology (ET) servo inverters
AKB-ID: 20034022
Last update: 2023/12/28
Category: 版本注释

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
联络表格 huizang.png沪公网安备 31019002000664号 沪ICP备10008287号-1