L_MC1P: i950 load encoder (slot B): encoder zero pulse…
URL: /en-es/go/akb/202000274/1L_MC1P: i950 load encoder (slot B): encoder zero pulse not usable as touch probe source Corrected from:Library:…
Search
L_MC1P: i950 load encoder (slot B): encoder zero pulse not usable as touch probe source Corrected from:Library:…
Cable-Check: If a wiring error of the motor phases is…
URL: /en-es/go/akb/202000207/1Cable-Check: If a wiring error of the motor phases is detected, bit 3 "CableCheck failed" in the status word (0x2C64:2) is erroneously not…
Cable-Check: If a wiring error of the motor phases is…
URL: /en-es/go/akb/202000206/1Cable-Check: If a wiring error of the motor phases is detected, bit 3 "CableCheck failed" in the status word (0x2C64:2) is erroneously not…
L_MC1P, FB 'L_SEMP_SetError': An application error…
URL: /en-es/go/akb/202000239/1L_MC1P, FB 'L_SEMP_SetError': An application error message is erroneously characterized as DriveError (ErrorID=20511) (corrected as of…
Increasing the value range of C12 and C13
URL: /en-es/go/akb/202000266/1Increasing the value range of C12 and C13 Corrected from:Inverter Drives 8400 StateLine V21.01.00Inverter Drives 8400 HighLine…
L_MC1P_SetSpeedCtrlLoadValue: loading I-component speed…
URL: /en-es/go/akb/202000241/1L_MC1P_SetSpeedCtrlLoadValue: loading I-component speed controller does not work with i950 (corrected from V03.22.00) Corrected…
Hiperface DSL (OCT): When switching off, an encoder…
URL: /en-es/go/akb/202000235/1Hiperface DSL (OCT): When switching off, an encoder error is erroneously detected and the reference status is deleted (corrected from…
Error in voltage controller application with VFCplus
URL: /en-es/go/akb/202000257/1Error in voltage controller application with VFCplus Corrected from:84TL V21.01 Response of the new version: The error has…
Data consistency in the external serial flash
URL: /en-es/go/akb/202000256/1Data consistency in the external serial flash Corrected from: 84SL V21.01Response of the new version: Before the…
BusOff can not be left with Reset node in 125 kBaud CAN…
URL: /en-es/go/akb/202000259/1BusOff can not be left with Reset node in 125 kBaud CAN networks (corrected from V15.02.02 Corrected from: Servo inverter 9400…
c5x0 / c750: After setting the Profinet IP address, the…
URL: /en-es/go/akb/202000225/1c5x0 / c750: After setting the Profinet IP address, the controller can no longer be reached via Ethernet (corrected from V1.5.0) Corrected…
TA Winder Tension: Interruption of voltage-controlled…
URL: /en-es/go/akb/202000221/1TA Winder Tension: Interruption of voltage-controlled operation by a controller inhibit (eliminated as of V1.5.2) Corrected…
L_TT1P_ElectricalShaftPosHigh: The programmed path…
URL: /en-es/go/akb/202000232/1L_TT1P_ElectricalShaftPosHigh: The programmed path parameters are exceeded during the offset procedure (corrected from…
Error message Sd6 /Sd12 after device start with…
URL: /en-es/go/akb/202000236/1Error message Sd6 /Sd12 after device start with Profinet module plugged Corrected from: 84TL V21.01 Response of the new…
L_TW2P_WinderTension: The correction value is limited…
URL: /en-es/go/akb/202000228/1L_TW2P_WinderTension: The correction value is limited by the influence - control via PI controller not possible (corrected from…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial