URL:
/fr-ch/go/akb/202000078/1
Position control ext. position controller: When changing the control mode to speed control, the actual position changes (corrected from…
URL:
/fr-ch/go/akb/202000333/1
Runtime optimisations: IEC functionality "__try...__catch" no longer works since FW V01.04.xx (corrected from V01.06.04)
Corrected…
URL:
/fr-ch/go/akb/202000332/1
Command 0x2022:3 and 0x2022:42: The occurrence of a "race-condition" can in rare cases lead to a SW crash "segfault" (corrected from…
URL:
/fr-ch/go/akb/202100315/1
Error message "PDB-ID is incompatible with device" (corrected from V1.22)
Corrected from:EASY Application Loader V1.22Response of the…
URL:
/fr-ch/go/akb/201900150/1
EtherCAT bus cycle time and use of a TA (0x4000>0): EtherCAT cycle time must be at least 1ms (corrected from V01.06.04)
Corrected…
URL:
/fr-ch/go/akb/202100004/1
Warning 0xFF05: Incorrectly a hardware defect is named as cause in the documentation (corrected from V01.06.04)
Corrected…
URL:
/fr-ch/go/akb/202100116/1
i950 only supplied with 24V and warm start: FB L_IE1P_ReadActualErrorCode sporadically does not display the complete error number…
URL:
/fr-ch/go/akb/202100302/1
i950 (unit size 6; 22kW): Standstill of the unit fan can cause overtemperature of the unit (corrected from production date…
URL:
/fr-ch/go/akb/201800165/1
Reference loss in case of brief interruption (5..8ms) of the 24V supply (corrected from V01.07.04)
Corrected from:Servo-Inverter i950…
URL:
/fr-ch/go/akb/202100158/1
Hiperface DSL (OCT): Display under 0x2C4B:26 is not correct, depending on the selection of the display value under 0x2C4B:25
Corrected…
URL:
/fr-ch/go/akb/202100295/1
PLC exception error when passing an Axis_REF to a function (corrected from V1.10)
Corrected from:Cabinet Controller c520 V1.10Cabinet…