EtherCAT: Changed second station address is not…
URL: /fr-ch/go/akb/201500801/1EtherCAT: Changed second station address is not accepted after restarting the i700 via device command 0x2022=1100 (corrected from…
Search
EtherCAT: Changed second station address is not accepted after restarting the i700 via device command 0x2022=1100 (corrected from…
Earth-fault/short-circuit monitoring function: May…
URL: /fr-ch/go/akb/201500849/1Earth-fault/short-circuit monitoring function: May respond in the case of long motor cables and 4-kHz switching frequency (corrected from…
Encoder types with a number of increments which cannot…
URL: /fr-ch/go/akb/201500240/1Encoder types with a number of increments which cannot be displayed as a power of two: unsteady actual speed value (corrected from…
PLC Designer: Device Repository includes entries with…
URL: /fr-ch/go/akb/201500514/1PLC Designer: Device Repository includes entries with the same name. (No modifications planned) Corrected from:PLC…
Telegram failure in the case of large line topologies
URL: /fr-ch/go/akb/201500896/1Telegram failure in the case of large line topologies Function extension: The performance of the Profinet switch on the module has…
Reading out oscilloscope data via Profinet
URL: /fr-ch/go/akb/201500895/1Reading out oscilloscope data via Profinet Function extension: The 94xx oscilloscope data can now also be read out via the Profinet…
Drive behaviour: After mains switching, the dynamic…
URL: /fr-ch/go/akb/201500811/1Drive behaviour: After mains switching, the dynamic response of the drive may change (corrected from V1.9.5) Corrected from:- i700…
i700 resolver version and FAST Motion: Reference state…
URL: /fr-ch/go/akb/201500804/1i700 resolver version and FAST Motion: Reference state of Motion axis is reset if encoder parameters differ from default (corrected from…
Incorrect triggering of An01: AIN1_I < 4 mA or An02:…
URL: /fr-ch/go/akb/201500866/1Incorrect triggering of An01: AIN1_I < 4 mA or An02: AIN2_I < 4 mA Corrected from: Inverter Drives 8400 StateLine…
V/f operation and Imax controller (0x2B08:x) not…
URL: /fr-ch/go/akb/201500570/1V/f operation and Imax controller (0x2B08:x) not parameterised: The output frequency slowly continues to rise after quick stop (corrected…
V/f operation and voltage boost: Motor may turn back…
URL: /fr-ch/go/akb/201500788/1V/f operation and voltage boost: Motor may turn back during reversing (corrected from V2.10.12) Corrected from:i700 servo…
L_MFail_1 does not work as for 9300Servo
URL: /fr-ch/go/akb/201500684/1L_MFail_1 does not work as for 9300Servo Corrected from: Inverter Drives 8400 HighLine and TopLine from firmware version 14.00.00.00…
L_MFail_1 error corrections
URL: /fr-ch/go/akb/201500683/1L_MFail_1 error corrections Corrected from: Inverter Drives 8400 HighLine and TopLine from firmware version 14.00.00.00 Response of…
Reconstruction of the position for resolvers with a…
URL: /fr-ch/go/akb/201500682/1Reconstruction of the position for resolvers with a number of pole pairs >1 Corrected from: Inverter Drives 8400 TopLine from firmware…
Deletion of the reference in the case of an angular…
URL: /fr-ch/go/akb/201500681/1Deletion of the reference in the case of an angular drift error despite a deactivated error response Corrected from: Inverter Drives…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial