URL:
/en-es/go/akb/200501588/1
Modification of a code leads to communication error
Which products are affected?
ESP-DDS2-x (Global Drive PLC Developer Studio V2.0 -…
URL:
/en-es/go/akb/200510940/1
Communication set-up not possible, error message 678
Which products are affected?
EMF 2181IB FW 1.1
What happens?
Connection to the…
URL:
/en-es/go/akb/200506848/1
Designation on the printout do not correspond to the ones in the HMI Designer
Which products are affected?
ESP-HMI1-P (HMI Designer V1.1…
URL:
/en-es/go/akb/200509620/1
Parameter set changeover, overvoltage message caused by a delay in time
Which products are affected?
8200vector (SW 3.5), 8200motec (SW…
URL:
/en-es/go/akb/200510154/1
Compilation error when using the LenzeIOSystemV0102.lib library
Which products are affected?
ESP-DDS2-x (Global Drive PLC Developer…
URL:
/en-es/go/akb/200502751/1
Parameter set changeover, setpoints not accepted if flying restart circuit is activated
Which products are affected?
8200vector (SW…
URL:
/en-es/go/akb/200509139/1
Response time to basic codes is too long
Which products are affected?
E82ZAFUC CANopen fieldbus function module with firmware version ≤…
URL:
/en-es/go/akb/200509137/1
Emergency telegrams are not transmitted correctly to the fault memory
Which products are affected?
E82ZAFUC CANopen fieldbus function…
URL:
/en-es/go/akb/200509136/1
Irrespective of the validity COB-IDs can be changed in the pre-operational state
Which products are affected?
E82ZAFUC CANopen fieldbus…
URL:
/en-es/go/akb/200509135/1
Response to a RTR telegram cannot be avoided
Which products are affected?
E82ZAFUC CANopen fieldbus function module with firmware version…
URL:
/en-es/go/akb/200509113/1
The bit 30 value range of COB-IDs is not compliant with the standards in case of PDOs
Which products are affected?
E82ZAFUC CANopen…
URL:
/en-es/go/akb/200507456/1
Setting of the CAN ports resets the CAN identifier to standard values
Which products are affected?
ESP-HMI1-P (HMI Designer V1.1 and…
URL:
/en-es/go/akb/200506845/1
Some settings of the HMI project are not printed
Which products are affected?
ESP-HMI1-P (HMI Designer V1.1 and higher)
What happens?…
URL:
/en-es/go/akb/200508986/1
After acknowledgement of an occurred heartbeat event the emergency telegram with the error code 0 is not sent
Which products are affected?…
URL:
/en-es/go/akb/200508985/1
With occurrence of a heartbeat event the emergency telegram contains a defective error code in byte 0 and byte 1
Which products are…