9400 with SM301 and 8400 with SU100 - Safe torque off at three controllers - performance level e
Function:
When an emergency-stop button or the shield grid is actuated, the motors are switched off according to stop category 0 of EN 60204-1. Faults have been excluded for protected cables (according to DIN EN ISO 13849-2:2008-09 and IEC 61800-5-2:2008-04). This applies to cables which are protected by a cable duct and installed inside the control cabinet.
Safety information / disclaimer:
The safety application and parameterisation notes are examples of possible subfunctions in machines.
The T10D value according to DIN EN ISO 13849-1, Annex C.4.2 is only indicated if a B10D value is available and the operating time is less than 20 years. Commissioning is prohibited until the machine has been checked in accordance with the regulations set out in the relevant EU directives / national laws. The safety instructions contained in the technical documentation must be observed. Using the examples does not exempt the user from careful project planning. For possible damages and consequential damages Lenze assumes no liability to the extent permitted by law. Copyright 2019 Lenze Automation GmbH
