Description The PLC Targets will be installed before starting the program PLC Designer by running the setup files.
In the target support package (TSP) you can find all configuration and add-on files, which are required for an application to operate a certain PLC (target system, target). The configuration applies to: the code generator, the memory layout, functions of the PLC and the I/O-modules. For the PLC browser etc. you must also integrate libraries, gateway-drivers, error-and ini-files. The main element of the TSP can be one or several target files. One target file refers to the additionally required target files for the configuration. It can share this configuration with other target files though.
During the installation of the TSP the corresponding target file for every target system is saved in its own folder and its path is recorded. The corresponding files are also copied onto the PC according to the info file *.tnf, which is additionally included in the TSP. The name of the target folder is the same as the name of the target. The system proposes the integration in a folder named by the producer.
The files installed with a target support package are read during the program start of the PLC Designer. The configuration of the target system, which is made in the programming system, is saved with the corresponding project.
System requirements
• Microsoft® Windows® XP
• 100 MB free hard disc drive capacity
• VGA graphic adapter
• pointing device (mouse, trackball, etc)
Installation
How to install the PLC targets:
1. Extract the ZIP file 'Lenze_SoftPLC_Targets_V5.04.zip' (2.83 MB) on your PC. In the ZIP file you find two installation files.
Setup_LenzeSoftPLC_5.xx.exe ==> Logic Target, contains no motion libraries, shorter loading and compilation time
and
Setup_LenzeSoftPLCMotion_5.xx.exe ==> Logic and Motion Target, contains also the motion libraries
2. Start the program 'Setup_LenzeSoftPLC_5.xx.exe' respectively Setup_LenzeSoftPLCMotion_5.xx.exe and follow the installation instructions.
Release:
The PLC Designer Target version V5.xx is released for being used with the
• IPC firmware as of V1.5
• IPC firmware as of V2.0
• PLC Designer as of V0.3
Please observe that the installation of this target overwrites a possibly already existing other version of the PLC target V5.xx on the PC. This only applies to targets within the main version V5.xx. Targets of other main versions (e. g. V6.xx) are not affected.
Important note:
This software is supplied to the user as described in this document. All risks resulting from its quality or use remain in the responsibility of the user. The user must provide all safety measures protecting against possible maloperations.
We do not take any liability for direct or indirect damage, e. g. profit loss, order loss or any loss regarding business.
