Which products are affected?
ESP-HMI1-P (HMI Designer V1.1 and higher)
What happens?
The following settings of the HMI project are not documented on the printout (Project Manager: menu item Tools>Print):
- settings regarding the active timers (menu item Configuration>Timer)
- defined access rights (menu item Configuration>Access rights)
- system error messages (menu item Configuration>System messages)
- settings in the Field keypad dialog (menu item Configuration>Field keypad)
- global print parameters (menu item Configuration>Print parameters)
- under the Fields subchapter of the Pages chapter:
- the number of the Visible figures and the Format (##.##) for the Number field
- the (displayed) Length for the Text field
- the colour set for the scale of the Bar chart field
- in the Hardware structure chapter
- the setting of the Processing field under the Parameter dialog (setting of the CAN identifier – Device properties dialog).
in the Project images chapter:
- the information by means of which Filter (graphic filter) the picture has been imported (project component Pictures)
- the option Compressed to HMI
the following project settings (menu item Configuration>Project settings):
- the option 'beep on screen touch' (General register)
- the option to indicate the date/time (Messages register)
- the setting of the Date format and Time format
Some dialog fields of the HMI Designer equipped with standard settings are not indicated either.
When does the problem occur?
The settings of the HMI project described above are not printed by the HMI Designer.
Possible diagnostics?
None.
Short-term measures/recommendations?
Add subsequently the settings of the HMI project missing on the printout by means of a text editor in order to complete the project documentation.
Evaluation:
When an HMI project is printed the project settings are not mentioned completely on this printout. In order to obtain a complete project documentation the user must document manually the missing settings subsequently (e.g. by using a text editor).
