Application Sample 'Virtual Master & Electrical Shaft' V3.8 (3200 C, p500)

Description:
The Application Sample AT 'VMaster & EShaft' is a sample project for commissioning machine modules in connection with the Lenze teachware case which represents an example of the Lenze "Controller-based Automation" system.
 
The ready-made sample project enables easy commissioning/diagnostics of the system which consists of a controller (3200 C controller) with a connected I/O system 1000 and i700 servo inverters. 
 
System requirements:
- PLC Designer V3.8
- The following libraries must be installed:
   - L_TT1P_TechnologyModules_SM3 (3.8.0.23 or higher)
- 3200C / p500 firmware V3.7 or higher (only in combination with L-force Motion)

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/201301826/1/
Meta data
Taxonomy: AppSample Electrical Shaft , AppSample Virtual Master , Controller 3221 C , Controller 3231 C , Controller 3241 C , Controller 3251 C , Controller 3200 C , Controller p500
AKB-ID: 201301826
Last update: 2023/09/10
Category: Automation Software

Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.

Further information

Contact form