Wiring in accordance with EMC requirements for controller 8200 vector 0.25 - 11 kW

Description:

The brochures mentioned in this article describe measures to create a CE-typical drive system with 8200 vector frequency inverters. When the described measures are considered a good operational safety can be achieved by reduced EMC interferences.

Brochure 'EMC_8200vector_0.25-11kW'

Based on the brochure 'EMC Basics' with this part 2 'Wiring in accordance with EMC requirements' Lenze informs users of 8200 vector about the base controllers' and the accessories' use in accordance to EMC requirements.

The Lenze accessories for the 8200 vector series contain many components, which are important referring to EMC. These components are:

• Mains chokes
• RFI filters
• Motor chokes
• Motor filters

The assignment and mode of functioning of these EMC components is extensively described.

Brochure 'EMC_8200vector_0.25-11kW_CAN'

Based on the brochures 'EMC-Basics' and 'EMC_8200vector_0.25-11kW' the part 'Wiring according to EMC with field bus function module systembus (CAN)' informs the users of 8200 vector inverters about the base controllers' application in accordance to EMC combined with the field bus function module 'systembus (CAN)'.

Brochure 'EMC_8200vector_0.25-11kW_PROFIBUS'

Based on the brochures 'EMC-Basics' and 'EMC_8200vector_0.25-11kW' the part 'Wiring according to EMC with field bus function module systembus (CAN)' informs the users of 8200 vector inverters about the base controllers' application in accordance to EMC combined with the field bus function module 'PROFIBUS DP'.

The brochures can be downloaded from the Lenze library under Frequency inverter - 8200 vector.