- Version history ECS supply module ≤ V5.1

ECS supply module V5.1 (serial version)

Function extensions:

Eliminated function restrictions:

Function restrictions:

ECS supply modul V5.0 (released version)

Additional functions:

AIF, mode for EtherCAT communication has been implemented, C0001 operating mode has been extended (from V5.0)
CAN initialisation after a bus off without mains switching (from V5.0)
CE0 AIF communication error monitoring C0126 has been implemented (from V5.0)
Diagnostics data can be read via second CAN PDO (V5.0 onwards)
Toggle bit monitoring (CE4) of the CAN system bus now switched-off by default (from V5.0)
More tolerant mains monitoring under poor mains conditions, LP1 message (from V5.0)

Remedied function restrictions:

ECS supply modul V4.0 (released version)

Additional functions:

GDC, offline assignment of the ECS device descriptions now with menu structure (V4.0 onwards)
Charging current control, display code C0023 for the peak current of the thyristor (V4.0 onwards)
Charging current control, C0022 maximum charging current, setting range extended up to 32A (V4.0 onwards)
Charging current control, C0031 adjustable threshold for OC1 overcurrent during loading (V4.0 onwards)
Charging current control, service codes C0028/C0029 for setting the parameters of the thyristor control (V4.0 onwards)

ECS supply modul V3.0 (released version)

Additional functions:

Remedied function restrictions:

NMT as response to remote request only suppressed at the master (remedied from V3.0)
OC6 monitoring of the internal brake resistor is initialised with 0 after switching on the 24V supply (remedied from V3.0)
SDO gateway does not work (C0370) (remedied from V3.0)
Sporadical LP1 mains fault in case of mains frequencies of 60 Hz and mixed up mains phases (remedied from V3.0)
Prolonged charging time after power supply enable in case of non-rigid and noise sensitive systems (remedied from V3.0)

ECS supply modul V2.3 (released version)

Additional functions:

Optimisation of the control of the UG relay when aborting the charging process (V2.3 onwards)
Charging of the DC bus improved (V2.3 onwards)
Switch-off temperature of the heatsink (OH threshold) (V2.3 onwards)
LP1 message (mains phase failure) is now entered immediately into the history buffer (V2.3 onwards)
OC1 monitoring (short-circuit) changed when switching on (V2.3 onwards)
OC3 monitoring (overload of the charging circuit) (V2.3 onwards)
Toggle bit for bus system (V2.3 onwards)
Time constant for Ixt monitoring (device protection) changed (V2.3 onwards)

ECS supply modul V2.1 (released version)

ECS supply modul V2.0 (released version)

ECS supply modul V1.2 (initial version)

Version history (Intranet supplement), topics published Lenze internally only