In the 'Fault reaction active' state, it is sporadially…
URL: /en-at/go/akb/201400235/1In the 'Fault reaction active' state, it is sporadially not switched to DC-injection braking if an encoder error occurs (corrected from…
Search
In the 'Fault reaction active' state, it is sporadially not switched to DC-injection braking if an encoder error occurs (corrected from…
Faulty DC-injection braking in case of ASM servo…
URL: /en-at/go/akb/201400234/1Faulty DC-injection braking in case of ASM servo control. Configuration of DC-injection braking has now been improved (corrected from…
Rotation test mode: Current/frequency (0x2825=2):…
URL: /en-at/go/akb/201400232/1Rotation test mode: Current/frequency (0x2825=2): Starting angle 0x2528:3 is not accepted correctly (corrected from V1.5.6) Corrected…
Operating modes without position control (csv, cst,…
URL: /en-at/go/akb/201400226/1Operating modes without position control (csv, cst, vl): Following error is generated although value is not relevant (corrected from…
Speed resolution 0x6090:x cannot be used in Lenze…
URL: /en-at/go/akb/201400223/1Speed resolution 0x6090:x cannot be used in Lenze setting (corrected from V1.7.5) Corrected from: i700 servo inverter from…
Hardware axis module encoder variant: Detected zero…
URL: /en-at/go/akb/201400036/1Hardware axis module encoder variant: Detected zero pulse position may be inaccurate (from HW 1D) Corrected from:i700 servo…
Hiperface SinCos absolute value encoder with low number…
URL: /en-at/go/akb/201400220/1Hiperface SinCos absolute value encoder with low number of periods per revolution (< 10): warning 0x7381 may occur (improved from HW 1D,…
Pole position identification (PPI) with Hiperface…
URL: /en-at/go/akb/201400222/1Pole position identification (PPI) with Hiperface absolute value encoder: identified pole position is very imprecise (corrected from…
Error message when creating the boot project (corrected…
URL: /en-at/go/akb/201400213/1Error message when creating the boot project (corrected from V3.9) Corrected from: PLC Designer V3.9p500 panel controller…
Task overflow when using CAN (corrected from V3.12)
URL: /en-at/go/akb/201400200/1Task overflow when using CAN (corrected from V3.12) Corrected from: L-force c300 controller V3.12L-force p300 controller…
Motor parameter identification via dialog fails in the…
URL: /en-at/go/akb/201400188/1Motor parameter identification via dialog fails in the case of ASM with holding brake (corrected from V1.6.3) Corrected from: -…
DC-injection braking as response to a fault can…
URL: /en-at/go/akb/201400195/1DC-injection braking as response to a fault can erroneously be replaced by quick stop (corrected from V1.6.3) Corrected from: -…
VisiWinNET 6.5.3 - Driver: LogicAndmotionV3 - error…
URL: /en-at/go/akb/201400204/1VisiWinNET 6.5.3 - Driver: LogicAndmotionV3 - error while browsing - System.ArgumentZeroException: Value must not be ZERO (corrected from…
Forms & Controls - FAlphaPad template: space bar has no…
URL: /en-at/go/akb/201400203/1Forms & Controls - FAlphaPad template: space bar has no function Corrected from:VisiWinNET V6.5 SP5 Response of the new…
'Response to error' 0x605E: New Lenze setting to avoid…
URL: /en-at/go/akb/201400191/1'Response to error' 0x605E: New Lenze setting to avoid unintended movements in the case of a feedback error (corrected from…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial