Clamp peak current limitation for SC from 4kW
URL: /en-at/go/akb/201500440/1Clamp peak current limitation for SC from 4kW Corrected from: Inverter Drives 8400 HighLine V16.00.00.00 and Hardware-Version 3A…
Search
Clamp peak current limitation for SC from 4kW Corrected from: Inverter Drives 8400 HighLine V16.00.00.00 and Hardware-Version 3A…
Vmax monitoring (C2703) not active during profile…
URL: /en-at/go/akb/201500344/1Vmax monitoring (C2703) not active during profile change Corrected from:9400 HighLine firmware version 12.00.18.00 9400 Servo…
Speed controller error > 100% during brake test:…
URL: /en-at/go/akb/201500349/1Speed controller error > 100% during brake test: Error 0x007b0012 Corrected from: - Servo Inverter 9400 HighLine with…
SLSx deceleration is not observed if 'override' is…
URL: /en-at/go/akb/201500343/1SLSx deceleration is not observed if 'override' is activated Corrected from:9400 HighLine firmware version 12.00.18.00 9400 Servo PLC…
Sporadic false tripping of SM301 monitoring function:…
URL: /en-at/go/akb/201500345/1Sporadic false tripping of SM301 monitoring function: SSM: Speed comparison error Corrected from:9400 HighLine firmware…
Sporadically, controller does not boot (corrected from…
URL: /en-at/go/akb/201500402/1Sporadically, controller does not boot (corrected from V3.9.1) Corrected from: c300 controller V3.9.1p300…
Firmware V01.07.06 don't use: Sporadically devices…
URL: /en-at/go/akb/201500376/1Firmware V01.07.06 don't use: Sporadically devices cannot be operated with! (corrected from V1.7.7) Corrected from:- i700 servo…
Changing FAST Motion parameters has no effects…
URL: /en-at/go/akb/201500266/1Changing FAST Motion parameters has no effects (corrected from V3.9.1) Corrected from:PLC Designer V3.9.1 (service pack…
Drift of the drive during operation in manual control…
URL: /en-at/go/akb/201500366/1Drift of the drive during operation in manual control mode when S-ramps are used (corrected from V9.1) Eliminated from: 9300 position…
Initialisation problem with laser measuring system DME…
URL: /en-at/go/akb/201500364/1Initialisation problem with laser measuring system DME 5000 via Hiperface interface (corrected from V9.1) Eliminated from: 9300…
Error message when deleting LM_ExtEncoder (corrected…
URL: /en-at/go/akb/201500257/1Error message when deleting LM_ExtEncoder (corrected from V3.9.1) Corrected from:PLC Designer V3.9.1 (service pack 1) …
No screen output when executing a batch file (corrected…
URL: /en-at/go/akb/201500325/1No screen output when executing a batch file (corrected from V3.10) Corrected from:Controller 3200C V3.10Panel Controller p500…
Commissioning function: Magnetising current calculated…
URL: /en-at/go/akb/201500327/1Commissioning function: Magnetising current calculated after identification is not correct (corrected from V1.9.3) Corrected from:-…
'Set actual position' function (0x2830=5) is not…
URL: /en-at/go/akb/201500346/1'Set actual position' function (0x2830=5) is not executed correctly if position resolution is not 16 bits (default) (corrected from…
Touch probe: Detected touch probe position sporadically…
URL: /en-at/go/akb/201500323/1Touch probe: Detected touch probe position sporadically deviates significantly (corrected from V1.7.6) Corrected from:-…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial