L_TS2P_FlexCamState: Attack point AP_xCalcCamProfiler
Function extension:
The technology module L_TS2P_FlexCam calculates the profile from the cam plate in the STANDBY state (scAccessPoints.AP_xCalCamProfiler = TRUE).
As soon as the technology module is switched on with xEnable = TRUE, the profile calculation of the cam plate is also activated. Here the position of the master axis is included in the x-axis. The x-axis is inserted into the curve profile and the y-position, speed and acceleration are calculated.
With the coupling xSyncPos = TRUE the slave axis is coupled to the y-axis.
With the setting scAccessPoints.AP_xCalCamProfiler = FALSE, the function of calculating the profile from the STANDBY state is deactivated. In this case, the y-axis is calculated from the curve profile from the time of coupling with xSyncPos = TRUE.
Contained in which products? L_TS2P_TechModulesSynchronizingCamming (from V03.19.0.103)
Application:
The cam can already be moved from the STANDBY state. The slave axis can be engaged at any position via input xSyncPos = TRUE.
