Corrected from:
Device descriptions of the c520, c550 and c750 controllers as of V1.6
Behavior of the new version:
In the device description of the controllers c520, c550 and c750 from V1.6 the checkbox 'Activate semitransparent character' is not set by default. This means that all texts and color changes are displayed again on the projected visualization pages.
- Library L_MC2P_MotionControlCam: The visualisations in this library do not show all texts contained in it.
- Application Template: The status LEDs that indicate the possibility of a mode change in the 'Machine Module Details' do not show a colour change, but only a transparent circle.
When does the behaviour occur?
The behaviour described above can occur when the checkbox 'Activate semi-transparent drawing' is set in the 'VisualizationManager' object on the 'Settings' tab.
The checkbox 'Activate semi-transparent drawing' is set by default in the device description of the controllers c520, c550 and c750 from V1.1.
Which products are affected?
Device descriptions of the controllers c520, c550 and c750 as of V1.1
Library L_MC2P_MotionControlCam
Project template ApplicationTemplate Standard
Short-term measures:
In the 'VisualizationManager' (see device tree in the PLC Designer project), deactivate the checkbox 'Activate semi-transparent drawing'.
Evaluation/Recommendations:
The visualisation pages in the PLC Designer are not displayed correctly due to a setting in the 'VisualizationManager'. The setting to be changed is described under 'Short-term measures'.
Automatic Translation
