- Version history - 8400 TopLine Software (SW) ≤ V01.xx

With Engineer 2.13 and 2.14:

Function restrictions:

8400 TopLine Software (SW) V02.03:

Eliminated function restrictions:

8400 TopLine Software (SW) V02.03:

Eliminated function restrictions:

8400 TopLine Software (SW) V02.00:

Function extensions:

General improvements in motor control properties (from V02.02 onwards)
Field weakening function for synchronous motors (from V02.02 onwards)
HTL encoder evaluation: range extension to 200 kHz (from V02.02 onwards)
Pole position identification for synchronous motors at standstill (from V02.02 onwards)
Motor phase failure detection prior to setpoint enabling and brake release (from V02.02 onwards)
General extension of device functions (from V02.02 onwards)
Position targets, converted from units into increments (from V02.02 onwards)
Multilingual display on the keypad (from V02.02 onwards)
Function blocks can also be used in the I/O interconnection (from V02.02 onwards)
Function blocks for an electrical shaft application (from V02.02 onwards)
Function blocks for a winding technology application (from V02.02 onwards)
Saving the actual position value safe against mains failure (from V02.02 onwards)

Eliminated function restrictions:

Function restrictions:

8400 TopLine Software (SW) V01.12:

Function extensions:

Eliminated function restrictions:

Function extensions:

-

8400 TopLine Software (SW) V01.11:

Function extensions:

Eliminated function restrictions:

Function restrictions:

8400 TopLine Software (SW) V01.10:

Function extensions:

- <a href='http:20100xxx'> </a>] (from V01.10 onwards)
QSP with position control (from V01.10 onwards)
QSP in the case of torque control with speed limitation (from V01.10 onwards)
Motor control type 'sensorless control of synchronous machine (SLPSM)' (from V01.10 onwards)
Multi-encoder input at terminal X8 - TTL encoder, SSI absolute value encoder (from V01.10 onwards)
Encoder feedback system resolver at terminal X7 (from V01.10 onwards)
Motor control type 'Servo control of a synchronous machine' (from V01.10 onwards)
VFCplusEco' motor control type (from V01.10 onwards)
Display of the actual speed value at switched off mains voltage (from V01.10 onwards)
Ultimate motor current, C0939 (from V01.10 onwards)
Axis bus / StateBus function (from V01.10 onwards)
Setting of the magnetisation (from V01.10 onwards)
Magnetisation time reduced (from V01.10 onwards)

Eliminated function restrictions:

8400 TopLine Software (SW) V01.00 (initial serial version):

Version history (Intranet supplement), aspects which have only been published Lenze internal