c5xx, c430, i950: Technical data and communication options Profinet

Frage:
What technical data and what communication options are available for the Profinet interface of the servo inverter i950. or the controllers c430 and c5xx?

Answer:

The Profinet module of the servo inverter i950 differs from the Profinet module of the controller c5xx.
The Profinet module of the servo inverter i950 can NOT be used in the controller c5xx.

The Profinet module of the controller c5xx can be used in the servo inverter i950 .

Servo inverter i950

Controller c5xx

Controller c430

Process data width

16 DWORD inputs
16 DWORD outputs
(fixed)

1 ... 250 Bytes inputs per slot
1 ... 250 bytes outputs per slot
max. 244 slots
max. 1440 bytes inputs process data
max. 1440 bytes outputs process data

Type Communication module (0x2002:010)

I9MAFR000000

C5MAFR000000

Not required (OnBoard)

What communications are possible via the Profinet module?

	Servo inverter i950	Controller c5xx	Controller c430	Comments
Profinet process data PDO	Yes	Yes	Yes
Profinet Parameter channel SDO	Yes	No	No
PROFIenergy	Yes	No	No
PLC Designer	Yes, via port 11740	Yes, via port 11740	Yes, via port 11740	i950, c5xx: PLC Designer Establish connection via ProfiNet
Easy-Starter	Yes	Yes	Yes
Easy-Starter Gateway Ethernet/EtherCAT	Not available	Yes	Yes
Application Loader / Firmware Loader	Yes	Yes	Yes
OPC-UA	No	Yes	Yes
CAA Net Base Services (TCP / UDP)	No	No	No
Network variables (UDP)	No	No	No
Easy-UI Visualization	Not available	No	Yes (without encryption)
VisiWinNET Visualization	Not available	No	No
NTP (Network time protocol)	Yes	Yes	Yes

[Automatic Translation]

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/202300231/1/