Technology Library SyncPos

Description:
With its ready-made standard software modules - called Lenze FAST - Lenze supports the efficient creation of modular control software. With Lenze FAST, programmers are able to complete up to 80 percent of the software engineering of standardised machine modules quickly and reliably. Programming is particularly efficient with the function and technology modules provided and tested by Lenze.

The technology library L_TS2P_SyncPos V3.23.0.13 contains the following technology modules:

Technology Module SyncPosBase

Functionality	Base
Position synchronism	X
Position coupling	X
Position trimming	X
Position offset via profile generator	X
Limit setpoints to allowed travel range	X

System requirements:

"PLC Designer" from V3.23-
Controller 3200 C/p500/c300 from V3.20.1 (only in conjunction with Lenze FAST Motion)
Controller c5x0 / c750 as of V1.6.0

Software installation:
To install the library in the PLC Designer:

Save the file TM_SyncPos.zip (3 MB) in any directory on your PC.
Unpack the ZIP file into any directory on your PC.
Start the PLC Designer.
Open the library repository of the PLC Designer (menu Tools>Library Repository...).
Click on the <Install> button and select the unzipped file L_TS2P_SyncPos_03_23_0_13.compiled-library.
Use the documentation help included in the ZIP file.

Hint:

This technology module has been included in the L_TS2P_TechModulesSynchronizingCamming library since 2023 (V3.26.0.169).

Please use this or a more recent version of the L_TS2P_TechModulesSynchronizingCamming and no longer the library from this article.

Further information can be found in this article:

New TM: L_TS2P_SyncPos

Automatic Translation

URL for linking this AKB article: https://www.lenze.com/en-de/go/akb/202100178/1/

Further information

TM SyncPos.zip