Application
Servo CAM 9300:
- Machines where the cam starting point has to be moved, e.g. for fine adjustment during production, product-dependent trimming, etc.
Description
Reset of the offset:
Owing to an extension of the function via code C1364/1 the offset in y-direction can now be added and removed. Although the offset used to be added, it was only reset internally and not at the drive.
- 0 = OFFS reset: RESET of offset internally (previous function, factory setting)
- 1 = OFFS disable: the offset is calculated back
Compression of offset:
With an expanded function it is now possible to apply the 'Extend/compress the y-axis' function to the default offset automatically. Until now it was necessary to adapt the offset from the origin of the curve according to the extension factor if motion profiles were extended/compressed. Activation of the function has been introduced with code C1351/0. In this way the mode can be selected:
- 0 = old mode (factory setting) without compression of the offset
- 1 = new mode, with compression of the offset
