Switch-off temperature of the heatsink (OH threshold) (V2.3 onwards)
Which products are affected?
Supply module ECSxE series, operating software V2.3
Function description
The switch-off threshold for the heatsink temperature (OH threshold) has been increased from approx. 80 °C to 90 °C and thus been adapted to the axis controllers.
Please observe the following instructions when downloading the new operating software V2.3 subsequently:
The new OH threshold is not accepted automatically in order to avoid that the device-specific adjustments stored in the device get lost. Therefore, the OH threshold has to be adapted manually after an update to V2.3. Regarding this the following codes are to be written by observing this order:
C0304 = 318
C0305 = 326
C0308 = 40
C0309 = 900 (corresponds to 90.0 °C)
C0308 = 0
C0309 = 1040 (store device set)
Control measure:
Switch the 24 V supply off and on again
Enter C0308 = 40
Display of C0309: 900 (corresponds to 90.0 °C)
Applications
Only relevant in case of applications with a very high utilisation of the supply module.
Taxonomy:
ECSxA application
,
ECSxE power supply module
,
ECSxK capacitor module
,
ECSxM motion
,
ECSxP position and shaft
,
ECSxS speed and torque
,
ECS servo inverters
AKB-ID:
200407062
Last update:
2023/09/08
Category:
Informations sur la version
Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
