PI trip after parameter set transfer (elimination)
Which products are affected?
9300vector 0.37…90 kW SW7.3 and 9300vector 110…400kW SW7.1
Eliminated function restriction:
The drive controller indicated a PI trip after a parameter set transfer. Sometimes this error only occurred if an identification run had been executed after the transfer, the parameter set had been saved in a non-volatile mode and the mains had been connected afterwards.
Under code C0912 only fixed limit values, to which the values entered or calculated under C0912 are limited, are used.
Taxonomy:
9300 vector EVF93xx-EH hoist frequency inverters
,
9300 vector EVF93xx-EV frequency inverters
,
9300 vector frequency inverters
AKB-ID:
200603282
Last update:
2023/09/08
Category:
Informations sur la version
Lenze reserves the right to change information on this page at any time. Any liability for the accuracy of the information is excluded.
