Homing cannot be started at C4000 = 1 (corrected from…
URL: /es-us/go/akb/200905105/1Homing cannot be started at C4000 = 1 (corrected from V2.0) Corrected from: ECS Motion V2.0 Behaviour of the new version? Homing…
Search
Homing cannot be started at C4000 = 1 (corrected from V2.0) Corrected from: ECS Motion V2.0 Behaviour of the new version? Homing…
CAN node guarding monitoring: Premature tripping…
URL: /es-us/go/akb/200908120/1CAN node guarding monitoring: Premature tripping possible once after activation (eliminated from V5.0) Eliminated from: ECS power…
Trip reset with C0043=0 via keypad is not possible…
URL: /es-us/go/akb/200908111/1Trip reset with C0043=0 via keypad is not possible (eliminated from V5.0) Eliminated from: ECS power supply module ECSxE, operating…
Incorrect position restoration after power system on…
URL: /es-us/go/akb/200910964/1Incorrect position restoration after power system on with the L_EsEncoderConv function block (elimination) Eliminated…
Number of increments not equal to 2^n in the…
URL: /es-us/go/akb/200910963/1Number of increments not equal to 2^n in the L_EsEncoderConv function block (elimination) Eliminated from: Library…
Incorrect evaluation of a range being exceeded in the…
URL: /es-us/go/akb/200910962/1Incorrect evaluation of a range being exceeded in the L_EsEncoderConv function block (elimination) Eliminated from: Library…
The L_CamSyncIn function block does not synchronise…
URL: /es-us/go/akb/200910961/1The L_CamSyncIn function block does not synchronise with the master speed (elimination) Eliminated from: LenzeCam library…
Incorrect status signals at the L_EsClutchPos function…
URL: /es-us/go/akb/200910894/1Incorrect status signals at the L_EsClutchPos function block (elimination) Eliminated from: Library LenzeElectricalShaft V01.03.04.00…
Incorrect status signals at the L_CamClutchPos function…
URL: /es-us/go/akb/200910888/1Incorrect status signals at the L_CamClutchPos function block (elimination) Eliminated from: Library LenzeCam V01.03.06.00 and higher,…
CANopen - Sending sequence of Emergency and BootUp…
URL: /es-us/go/akb/200908965/1CANopen - Sending sequence of Emergency and BootUp telegrams when device is switched on (remedied from V4.0 onwards) Remedied…
Table positioning - No harmonic setpoint adopted when…
URL: /es-us/go/akb/200908963/1Table positioning - No harmonic setpoint adopted when the operating mode is changed (remedied from V4.0 onwards) Remedied from: 8400…
Table positioning - Torque surge during reference run …
URL: /es-us/go/akb/200908960/1Table positioning - Torque surge during reference run (remedied from V4.0 onwards) Remedied from: 8400 HighLine SW V4.00…
Table positioning - control bits are blocked if the…
URL: /es-us/go/akb/200908958/1Table positioning - control bits are blocked if the specified profile is incorrect (remedied from V5.0 onwards) Eliminated from:…
Indication for brake resistor utilisation for the 400 V…
URL: /es-us/go/akb/200908955/1Indication for brake resistor utilisation for the 400 V devices incorrect (remedied from V4.0 onwards) Remedied from: 8400 StateLine,…
Sensorless Vector Control (SLVC) operating mode - Motor…
URL: /es-us/go/akb/200908954/1Sensorless Vector Control (SLVC) operating mode - Motor does not start (remedied from V4.0 onwards) Remedied from: 8400 StateLine…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial