Incomplete parameterisation of CAN slaves with "Service…
URL: /fr-ca/go/akb/201400003/1Incomplete parameterisation of CAN slaves with "Service Data Object" tab (corrected from V3.12) Corrected from: PLC Designer…
Search
Incomplete parameterisation of CAN slaves with "Service Data Object" tab (corrected from V3.12) Corrected from: PLC Designer…
MF LEDs of I/O modules are on, EtherCAT does not change…
URL: /fr-ca/go/akb/201304812/1MF LEDs of I/O modules are on, EtherCAT does not change to Operational (corrected from 1A.40) Corrected from: IO-1000 EtherCAT…
Automatic dimming of p500 does not work (corrected from…
URL: /fr-ca/go/akb/201400004/1Automatic dimming of p500 does not work (corrected from V3.9) Corrected from: p500 controller V3.9Response of the new version:…
Backup & Restore: After 'Restore', archived alarms…
URL: /fr-ca/go/akb/201304813/1Backup & Restore: After 'Restore', archived alarms cannot be accessed from VisiWinNET project (corrected from V3.13) Corrected…
PDO mapping of CANopen slaves is partially lost…
URL: /fr-ca/go/akb/201304807/1PDO mapping of CANopen slaves is partially lost (corrected from V3.12) Corrected from: PLC Designer V3.12 Response of the…
Operation with fout ≥ 650Hz causes OC11 error
URL: /fr-ca/go/akb/201304889/1Operation with fout ≥ 650Hz causes OC11 error Corrected from: Inverter Drives 8400 HighLine V16.00.00Inverter Drives…
Incorrect scaling of the speed controller parameters if…
URL: /fr-ca/go/akb/201304888/1Incorrect scaling of the speed controller parameters if C059≥650Hz Corrected from: Inverter Drives 8400 StateLine…
No keypad texts for bit codes
URL: /fr-ca/go/akb/201304887/1No keypad texts for bit codes Which products are affected? 8400 StateLine, HighLine and TopLine: FW version ≤ 13.00.00.00 What…
ASM does not start up in SC-ASM if C095≈C022
URL: /fr-ca/go/akb/201304870/1ASM does not start up in SC-ASM if C095≈C022 Eliminated from: 8400 HighLine and TopLine: FW version = 13.00.00.00 Response…
No error response in the case of repeated activation of…
URL: /fr-ca/go/akb/201304869/1No error response in the case of repeated activation of the limit switch in "position follower" operating mode Eliminated from: 8400…
Incorrect feedforward control while releasing the brake…
URL: /fr-ca/go/akb/201304851/1Incorrect feedforward control while releasing the brake when the M-storage is carried out Eliminated from: 8400 HighLine and…
Current dips at fswitch
URL: /fr-ca/go/akb/201304849/1Current dips at fswitch Eliminated from: 8400 StateLine, HighLine and TopLine: FW version = 13.00.00.00 Response of the new…
Sporadic motor phase error before operation
URL: /fr-ca/go/akb/201304848/1Sporadic motor phase error before operation Eliminated from: 8400 StateLine, HighLine and TopLine: FW version =…
C002 reports 'OFF/complete‘ in spite of Id4 error…
URL: /fr-ca/go/akb/201304847/1C002 reports 'OFF/complete‘ in spite of Id4 error during motor parameter identification Eliminated from: 8400 StateLine, HighLine and…
Switching hysteresis for device fan too low
URL: /fr-ca/go/akb/201304846/1Switching hysteresis for device fan too low Eliminated from: 8400 StateLine, HighLine and TopLine: FW version =…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial