Motor utilisation (I²xt): Monitoring function not…
URL: /es-mx/go/akb/201302992/1Motor utilisation (I²xt): Monitoring function not described correctly in documentation (eliminated from V1.4.0) Eliminated from: -…
Search
Motor utilisation (I²xt): Monitoring function not described correctly in documentation (eliminated from V1.4.0) Eliminated from: -…
Motor temperature monitoring: Switching threshold…
URL: /es-mx/go/akb/201303181/1Motor temperature monitoring: Switching threshold hysteresis for warning and trouble only 0.5 instead of 5 Kelvin (eliminated from…
Error message ¨Mailbox init command timeout¨…
URL: /es-mx/go/akb/201302935/1Error message ¨Mailbox init command timeout¨ (eliminated from 3200 C/p500 V3.6) Eliminated from:3200 C controller V3.6p500 controller…
EtherCAT Bus reports ¨Master set Operational failed…
URL: /es-mx/go/akb/201302931/1EtherCAT Bus reports ¨Master set Operational failed 0x4000007¨(eliminated from 3200 C/p500 V3.6) Eliminated from: 3200 C, p500…
Error message ¨SMC_DI_FIELDBUS_LOST_SYNCRONICITY¨ when…
URL: /es-mx/go/akb/201302927/1Error message ¨SMC_DI_FIELDBUS_LOST_SYNCRONICITY¨ when using breakpoints (eliminated from 3200 C/p500 V3.6) Eliminated from:3200 C,…
PLC logic changes silently (eliminated from PLC…
URL: /es-mx/go/akb/201303381/1PLC logic changes silently (eliminated from PLC Designer V3.6) Eliminated from:PLC Designer V3.6 Behaviour of the new…
Exception in PLC Designer when closing or changing a…
URL: /es-mx/go/akb/201303264/1Exception in PLC Designer when closing or changing a tab in the case of an existing online connection (eliminated from PLC Designer…
SSI encoder position integrating with v_max
URL: /es-mx/go/akb/201301279/1SSI encoder position integrating with v_max Fixed from: Inverter Drive 8400 TopLine from V14.00.00.00.Behavior of the new…
Position at LS_MultiEncoder does not directly follow…
URL: /es-mx/go/akb/201301195/1Position at LS_MultiEncoder does not directly follow the encoder position Corrected from: Inverter Drives 8400 TopLine…
Position control during QSP uses actual value of…
URL: /es-mx/go/akb/201301194/1Position control during QSP uses actual value of position encoder Corrected from: Inverter Drives 8400 TopLine…
Speed-dependent zero pulse offset
URL: /es-mx/go/akb/201301192/1Speed-dependent zero pulse offset Corrected from:Inverter Drives 8400 TopLine V15.01.00 Response of the new version:There is…
Unexpected zero pulse at DFOUT with RS as signal source
URL: /es-mx/go/akb/201301176/1Unexpected zero pulse at DFOUT with RS as signal source Corrected from:Firmware version 21.00.00.00 fixes this behavior.Response of…
Ethernet Powerlink synchronisation not possible
URL: /es-mx/go/akb/201301118/1Ethernet Powerlink synchronisation not possible Corrected from:Inverter Drives 8400 StateLine V13.00.00Inverter Drives 8400…
EtherCat sync cannot be used - incorrect bus status
URL: /es-mx/go/akb/201301117/1EtherCat sync cannot be used - incorrect bus status Corrected from:EtherCat communication module E84AYCET version…
Following error is deleted at controller inhibit
URL: /es-mx/go/akb/201301116/1Following error is deleted at controller inhibit Corrected from: Inverter Drives 8400 HighLine V14.00.00Inverter Drives…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial