Development version for generating visualisation applications and SCADA-applications of higher functionality, as well as full .Net-support including programming.
Microsoft® XP Professional (32 Bit) as of SP3 / Windows 7/8/8.1/10 (32 Bit and 64 Bit)
IBM-compatible PC with Intel® processor as of 1.4 GHz or similar
At least 1 GB RAM
At least 2 GB free hard disk capacity
For Windows CE applications, Visual Studio 2008 Professional Edition.Visual Studio 2005 as of Standard Edition
Install Optional Microsoft® .NET Compact Framework 2.0 SP1, when debugging of CE applications is required.
Visual Studio 2013 from Community Edition for the VisiWinNET Compact and Standard project types.
Visual Studio 2015 is supported as of VisiWinNET version 6.5 SP5.
280 MB for .Net-Framework 2.0 (if it does not yet exist, the installation will be executed automatically)
Graphic: recommended 1980x1080 pixel (True Color 32 Bit)
Note: The resolution on the development computer must be at least equal to or greater than the resolution of the target device.
Ethernet interface for communication with the target device
Free USB-connection for the hardware dongle
Visual Studio system requirements are determined by the use of VisualStudio version and depend on the edition.
Example 'Visual Studio 2015' see
Proceed as follows to install VisiWinNET Smart:
installed version 6.1/6.2/6.3/6.4 or 6.5
may remain on the
Save the zip fileVisiWinNET-Professional-Lenze-6.5-SP4.1-EN.zip your PC.
Unpack the ZIP-file VisiWinNET-Professional-Lenze-6.5 SP5-EN.zip on your PC.
Setup.exe program and follow the instructions of the installation program.
If VisiWinNET Smart is also installed, be sure to update both, VisiWinNET® Smart and VisiWinNET® Professional to the same version.
Otherwise the correct functionality can not be guaranteed.
Project conversion information:
To use the new features of VisiWinNET® 6.5 SP5, the project must be converted to VisiWinNET® 6.5 SP5.
Converting/Working existing projects:
If VisiWinNET® Professional V6.1, V6.2, V6.3, 6.4 applications are supposed to be converted to V6.5. SP5 a corresponding official V6.1 to 6.4 version is
not required on the computer.
Existing projects that were created with VisiWinNET® version 6.1 to 6.4 can be opened and edited with VisiWinNET® 6.5 SP5 without making any changes to the project.
In this case it is required that the corresponding VisiWinNET® version is installed parallel to VisiWinNET® 6.5.4.