Latest full version VisiWinNET® Smart V6.5 SP5

Development version for generating visualisation applications of simple and medium complexness.
The system has an own, fully graphical development environment and supports the user by prefabricated templates and examples.
  • Versions-History VisiWinNET® Smart  information on function extensions and fault eliminations of VisiWinNET®
  • Without a license VisiWinNET Smart can be operated in demo mode only. The license has to be ordered separately.
  • The symbol configuration file created by the PLC Designer V3.12 will be supported by VisiWinNET® SMART greater or equal V6.5.4.1.
  • Note: The German and English version cannot be installed parallel.

System requirements

  • Microsoft® Windows® XP (32 Bit) ab SP3 / Windows® 7, 8, 8.1, 10 (32 und 64 Bit)
  • IBM-compatible PC with Intel® processor as of 1.4 GHz or similar 
  • At least 1 GB RAM 
  • At least 1 GB free hard disk capacity 
  • 280 MB for .Net-Framework 2.0 (if it does not yet exist, the installation will be executed automatically) 
  • Graphic: At least 800x600 pixel (High Color 16 Bit), we recommend 1980x1080 pixel (True Color 32 Bit) 
    Note: The resolution on the development computer must be at least equal to or greater than the resolution of the target device.
  • Ethernet interface for communication with the target device 
  • Free USB-connection for the hardware dongle
Software installation
Proceed as follows to install VisiWinNET Smart:
  1. A previouslyinstalled version 6.1/6.2/6.3/6.4 or 6.5 may remain on thecomputer.
  2. Save the zip file on you PC.
  3. Unpack the ZIP-file on your PC. 
  4. Start the Setup.exe program and follow the instructions of the installation program.
  5. If VisiWinNET® Professioanl is also installed, be sure to update both, VisiWinNET® Smart and VisiWinNET® Professional to the same version.
    Otherwise the correct functionality can not be guaranteed.
  6. For Embedded or Standard proejcts on target system a seperate runtime setup is requiered
    - VisiWinNET® Standard Runtime Setup for V6.5 SP5
    - VisiWinNET® Embedded Runtime Setup for V6.5 SP5 

Project conversion information:
To use the new features of VisiWinNET® 6.5 SP5, the project must be converted to VisiWinNET® 6.5 SP5.

Converting/Working existing projects:
If VisiWinNET® Smart V6.1, V6.2, V6.3, 6.4 applications are supposed to be converted to V6.5 SP54, a corresponding official V6.1 to 6.4 version is not required on the computer.
Existing projects that were created with VisiWinNET® version 6.1 to 6.4 can be opened and edited with VisiWinNET® 6.5 SP5 without making any changes to the project.
In this case it is required that the corresponding VisiWinNET® version is installed parallel to VisiWinNET® 6.5 SP5.